Tactical & Duty Gear

120 Volt AC Converter fits Maglite Mag Charger Rechargeable Flashlights.

Replacement Tailcap/Switch Assembly for use with the Stinger XT.

A rechargeable LED light system with spot to flood focus in turn of the head, and programmable output function modes.

Train hard, train smart using the 5.0 oz. Inert Training Aerosol Grenade from Sabre. Designed to offer lifelike combat simulation, the training unit replicates the exact size, weight and function of its live counterpart but with an inert, harmless spray...

The SF18650B is a Lithium Ion-protected 18650 battery with MICRO-USB charge capability. This allows the user to conveniently charge the battery using any USB power source such as a USB wall charger, computer/laptop, power bank, or automotive USB port...

The SC1 Spares Carrier holds six 123A lithium batteries plus one of following shorter style lamp assemblies: P60, P60L, P61, P90, P91, R30, R60, MN01, MN02, MN03, MA02. Made from see-through impact-resistant polymer. Spares Carriers are must-have items...

The New Sniper's Data Book Pouch is a must have item! Designed to hold your data book (not included) at the open without falling back or blowing forward. Features a pull out zippered pocket to carry your calculator, wind meter, etc. Elastic band to keep...

Rugged Duty Style edges with round corners and a suede divider. For all badge fit information, please refer to the link below. Badge manufacturer and model number must be identified before cutout is selected to ensure proper fit. Badge Cutout Fit...

This holder features a recessed badge section to specifically fit an individual badge and ID section. It also features a Velcro closure and contains an interior storage pocket for the neck chain when not being worn. ID Size: 3 x 4 Maximum badge...

Phoenix Advantage-Plus is the best looking nylon gear ever, and built to last. Abrasion and moisture resistant. Hard shell molded.

Just as with the many other Plano brand carry and storage cases, the Plano 1612-00 Field Case is ideal for field work. This offers a deep storage up under the lift-out tray, perfect for extra mag clips, torch, batteries, serrated knives and other...

Made with ballistic nylon.

This Code Red Guard 3.5 earpiece features a soft hook construction that combines durability and comfort. The listen only earpiece slides right over the top of the ear, staying securely but gently in place. Choose between the 14 inch and 40 inch cords,...

The 6004-35 is a set of two receiver plates for use with the 6004-34 ELS Locking Forks. The 6004-35 provides a mounting platform for any tactical or competition accessory. It allows them to be placed in various locations, including belt clips or tactical...

Constructed with premium cowhide and solid brass hardware.

Plano lets you have an ammo can hold your gear and let you grab it and go for those range trips or anything outdoors. It will also work great for tools or anything you want in one spot to grab and go.  Features: Heavy-duty materials and construction. ...

Shield shape leather holder clips to belt. Holds badges 3-1/2 in. x 2-1/2 in.

The 5521 is a Quick Release Handcuff Case that fits the 2.25 Sam Browne Belt. Access your cuff quickly with the flick of your thumb. Made of top grain leather and fits standard handcuffs.

Virtually impossible to violate, Tamper Guard Evidence Tape outperforms all evidence tapes and is ideal for anchoring and sealing today’s exotic plastics and other finishes. Each roll is printed in safety orange using a special dye that will bleed and...

Used for field work around the world, our hard-cover notebooks are made to endure the onslaught of the elements as well as the slow, insidious passage of time. Our durable fabric covers protect your notes from impact and weather.  Rite in the Rain...

Mounts to any S.T.R.I.K.E. or PALS/MOLLE platform by weaving the integral straps on the back of the pouch in and out of the platform webbing. Constructed of 500 denier nylon (solid colors) or 500 denier CORDURA nylon (MultiCam).

Clipboard light with flexible neck to maneuver beam. Floods entire writing surface. Clips on all POSSE equipment. Overall base 6.75 x 1. White bulb included. Uses 2 AA batteries (not included). Shielded bulb protects night vision.

Durable polypropylene construction. Bottom opening for convenient access, built-in hanging hole on back. Six internal storage compartments keep supplies organized. Strong low profile clip with rubber grips holds up to 1/2 paper securely. Cover snaps shut...

Top grain leather

Stash it in your hiking pack, bottle pouch, or even in the palm of your hand. This lightweight, collapsible flask features our classic one-piece silicone bite valve for rapid hydration on hunt day and packs down easily once it’s empty. We designed the...

Traditional non-molded duty gear is constructed of durable, abrasion-resistant, easy-care CORDURA nylon. We’ve combined this exclusive four-layer laminate CORDURA nylon with waterproof closed-cell foam padding, flexible polymer reinforcement and 150...

This Quick Disconnect female mount from Blackhawk is designed for use with their family of versatile SERPA holsters. It allows you to use your holster with a variety of wearable platforms, including leg drop rigs and the SERPA tactical vest mount. It...

The 7926 AccuMold Elite Compact Light Holder is available in two sizes fitting Surefire and Streamlight models and similar. Will accommodate all flashlight lengths and fit most compact 1 in. diameter lights. Conveniently fits both 2 in. (50 mm) and 2.25...

5531 Quick Release Handcuff Case combines a professional look and design with the benefits of a quick release case. The quick release snap allows an easy quick draw action that is a necessity when a situation starts to get out of control. Top Grain...

The 7326 AccuMold Compact Light Holder is available in two sizes fitting Surefire and Streamlight models and similar. Will accommodate all flashlight lengths and fit most compact 1 in. diameter lights. Conveniently fits both 2 in. (50 mm) and 2.25 in...

3.8 x 2.8 Oval Generic pin-in holes Full swivel for easy badge placement Hook and Loop closure Clips on 1 3/4 belt

The HellStorm Tactical Elbow Pads are built for comfort and performance! Designed to give full range of motion in extreme tactical situations. Made with non-slip flexible molded Talon-Flex plastic contact area and 1000D Nytaneon nylon. These elbow pads...

Cone Fog pattern reaches 15 to 18 feet. All FIVE POINT THREE formulas are oil based, Taser safe and non-flammable. FOX premium defense sprays provide the fastest-acting and most reliable formulas available. They also use the largest nozzle openings,...

Top grain leather For 2-1/4 Sam Browne belt

Keep your duty rigs and loaded belts on your waist where they belong with the help of the Molded Belt Keepers from Blackhawk. Loaded rigs are heavy, and the wait of radios, sidearms, handcuffs, batons and other essential gear can pull them down and...

Professional Belt Keepers are designed to lock the duty belt and the inner belt together and keep them together. Tough no- wear, no-glare snaps stay snapped despite the most rigorous activity.

Professional Belt Keepers are designed to lock the duty belt and the inner belt together and keep them together. Tough no- wear, no-glare snaps stay snapped despite the most rigorous activity.

An effective way to energize your devices, the Streamlight SLB-26 battery is a brilliant way to ensure you have got all the power you need. These Batteries from Streamlight were created while using the types of durable and reliable components you have...

The Multi-Angle Helmet Mount is a mounting bracket for attaching a flashlight that has a 1 handle diameter to the brim of virtually any Fire Helmet or Hard Hat. The mount can be attached to either side of the helmet to provide hands-free illumination...

ASP Tri-Fold disposable restraints are compact, easily carried and rapidly applied. ASP cases protect and securely retain two folded restraints with pulls or rings attached. Attach the Tri-Fold Belt Case to the belt by employing the integral belt loop...

Clip-On Horizontal ID HolderHORIZONTAL ID HOLDER W/ BELT CLIP

The T-Spacer Kit allows the user to customize his or her Safariland holster to be worn farther away from the body. Accommodates all 3-hole patterned holsters and consists of 8 screws, 2 T-Spacers and one Allen wrench. This system is assembled in between...

3.75 Circle Generic pin-in holes Full swivel for easy badge placement Hook and Loop closure Clips on 1 3/4 belt

The knife provides a safe means of training law enforcement personnel to deal with the dangers of edged weapons. Injection molded from an extremely durable synthetic, the distinctive color of the knife assures trainers that live weapons are not being...

The QLS 22 Receiver Plate is designed to accept the QLS 19 Locking Fork. Constructed of injection molded nylon, it screws onto mounting platforms such as a tactical leg shroud, belt loop, wall or any other stable location. The system (fork and plate)...

The 6004-DFA Drop Flex Adapter allows user to wear a thigh rig below the hip without shifting the weight farther down the leg and keeps the rig from sliding on belt. This design moves the thigh plate higher on the leg, providing added stability for thigh...

ReTabs are pressure-sensitive correcting labels used to replace unacceptable fingerprints on a fingerprint card. Simply roll a new print on the ReTab and affix it to the fingerprint card once an acceptable print has been taken.

Designed to hold the Minitor V Pager Snap Closure allows for easy access Loop fits up to a 2 1/4 duty belt

There’s no need for labels. Simply place your evidence inside the bag and seal with evidence seal or tape. You can log your information along with a chain of possession on the outside of the bag.

The Safariland 65 Molded Belt Keeper 4 PACK is a ready to go keeper system designed for Sam Browne belts. The snaps and design of the keepers are great for everyday use while on duty. They are durable and reliable for any obstacle you may come across.

The 745BL Belt Clip is designed with a 3-hole pattern, allowing interchangeability among various Safariland holsters. Made of durable nylon and clips on/off without having to remove the belt and/or other accessories. Fits belts with widths from 1.5...